433 remote control
Six-channel fixed code remote control:
The six-channel wireless intelligent receiving controller outputs switch signals for the six relays, which can enable the equipment to be controlled to achieve the forward and reverse rotation of the motor; or the switch can be switched on and off, as well as various special control procedures. Mainly used in electric doors, windows, lifting equipment, gateways, elevators, industrial control and security industries and other fields.
Working voltage: 12V
Static working current: ≤6mA
Working temperature: -40°C-+80°C
Receiving sensitivity: ≥-105dBm
Working frequency: 315MHz, 433MHz
Output voltage: AC and DC selectable
Output current: ≤3A
1. Press and hold the learning button on the control panel (receiver) for 5 seconds, the indicator light is always on to enter the learning state.
2. Press RC's button to send the function code command to receiver, the indicator light flashes and goes out at this time, then the pairing is completed.
Press different serial number buttons to get different working modes, take the new sample remote control as an example:
Press the No. 1 key for the full jog mode. That is, all 1-6 relays are in jog working state.
Press the No. 2 button for full interlock mode, that is, all relays 1-6 are in self-locking mode.
Press the No. 3 key for full self-locking mode. That is, all 1-6 relays are in interlock working state.
Press the No. 4 key for 3 jog and 3 self-locking mode, that is, relays 1-3 are jog mode, and relays 4-6 are self-locking mode.
Press the No. 5 key for 3 self-locking and 3 interlock mode, that is, relays 1-3 are in jog mode, and relays 4-6 are in interlock mode.
Press the No. 6 key for 3 self-locking and 3 interlocking mode, that is, relays 1-2 are in jog mode, and relays 3-6 are in interlock mode.