China Wholesale Smart Infrared Remote Manufacturers - 2.4G Smart Remote User Manual – Doty

Ⅰ.Introduction

This remote is an universal remote control-

ler. It’s normal that a few keys might not be applicable to some of the devices because of different codes by different manufactur- ers, such as Amazon Fire TV and Fire TV Stick, or some Samsung, LG, Sony smart TV.

Ⅱ.Operating

1.How to Use

1)Plug the USB dongle into the USB port, smart remote will be connected with the device automatically.

2)In case of disconnection, short press OK+HOME, LED will flash fast. Then plug the USB dongle into the USB port, LED will stop flashing, which means pairing succeed.

2.Cursor lock

1)Press Cursor button to lock or unlock cursor.

2)While cursor unlocked, OK is left click function, Return is right click function. While cursor locked, OK is ENTER function, Return is RETURN function.

3.Adjust Air Mouse cursor speed

There are 3 grades for the speed, and it is in middle by default.

1)Short press ”HOME” and ”VOL+” to increase the cursor speed.

2)Short press ”HOME” and ”VOL-” to decrease the cursor speed.

4.Standby mode

The remote will enter into standby mode after no operation for 5 seconds. Press any button to activate it.

5.Factory reset

Short press OK+RETURN to reset the remote to factory setting.

6.Function Keys

Fn: After press Fn button, LED turns on.

Input numbers and characters

Caps: After press Caps button, LED turns on. Will capitalize the typed characters

7.Microphone(optional)

1)Not all the devices could use Micro-phone. It will require the APP support voice input, like Google assistant app.

2)Press Mic button and hold to turn on Microphone, release to turn off Micro- phone.

8.Backlight(optional)

Press the backlight button to turn on/off backlight or change color.

9.Hot Keys(optional)

Support one-key access to Google Play,Netflix, Youtube.

III.IR learning steps(taking Power button as example)

1.Press POWER button on the smart

remote for 3 seconds, and hold unit red LED indicator flash fast, then release the button. Red indicator will stay on for 1 second, then flash slowly. Means smart remote entered into IR learning mode.

2.Point the IR remote to the smart remote head by head, and press any button on the IR remote. The red indicator on the smart remote will flash fast for 3 seconds, then flash slowly. Means learning succeed.

3.Repeat above two steps for other buttons.

Notes:

●There are 15 buttons could be used as learning buttons, except Voice/IE, Cursor and Backlight button.

●The IR remote need to support NEC protocol.

●After learning succeed, the button only send IR code.

IV.Specifications

1)Transmission and Control: 2.4G RF wireless

2)Sensor: 3-Gyro + 3-Gsensor

3)Remote control distance: about 10m

4)Battery type: Built-in rechargeable battery

5)Power consumption: about 10mA in the work condition

6)Microphone power consumption: about 20mA

7)Product Size: 155x50x12mm

8)Product Weight: 66g

9)Supported OS: Windows, Android, Mac OS, Linux, etc.

T120-M